— IMEX EXCHANGE MEMBER —
Protective Coating Co.
The PC-Family of Repair Products

 

PC-7 — Designed for the tough jobs, and formulated for maximum bonding power. Components A and B when mixed, react to form a bond of tremendous strength. Your choice when you need to fill or bond large areas.*

PC-11 — All purpose WHITE epoxy. Designed for wet, dry or underwater repairs. This epoxy is your choice where the surface being bonded will not dry out or where the color is critical. Marine Grade epoxy.*

PC-SuperEpoxy — convenient household epoxy bonds just about everything. Sets up and cures quickly, but has the strength of an industrial epoxy. Translucent in color. You choice of just about any repair imaginable.

PC-Putties — Your choice for easy, fast emergency repairs. Consists of five specifically designed fast setting hand moldable putty epoxies. PC-Metal - Metal filled super quick setting putty. PC-Marine - Mixes white and works wet or underwater. PC-Crete - Looks and feels like concrete. PC-Lumber - Replace and reshape missing wooden pieces. PC-Plumbing. Designed specifically for for plumbing repairs and NS rated safe for drinking water.*

PC-Petrifier — water based WOOD HARDENER for rotted wood. Easy to use (no mixing) system designed to harden and prevent further rot or insect damage. Your choice for items like totted window sills and door frames. NO solvents and NON TOXIC.*

PC-Rot Terminator — NON SOLVENT epoxy based system - Designed to harden and preserve the most seriously damaged wood. This is your choice where structural results are needed or in a marine environment.

PC-Woody — Designed to replace missing wood. This is the second step in restoration after the damaged area is hardened. Rebuild missing areas, then sand and paint or stain. Your choice for interior and exterior permanent wood repairs.*

*Package in English, Bilingual Spanish/English and Bilingual French/English
PC-7® Paste Epoxy
The Impossible Made Easy		 Family of Epoxy Putties
The Ultimate Emergency Repair
PC-7® is a tough job Epoxy formulation developed for maximum bonding power. Components A (grey) and B (black), when mixed, react to form a bond of tremendous strength. PC-7® formulation provides extended working time, giving user ample time to complete larger jobs, reposition work or make changes. High wet grab or tack of PC-7® demonstrates excellent chemical resistance to mild acids, caustics, detergents, gasoline, fuel oil, salt, and fresh water. PC-7® will not bond to wax paper, TEFLON® , polyethylene, and some soft plastics. Test area when in doubt.

PC-PuttiesTM are hand moldable epoxy that are especially designed for emergency type repairs where time is of the essence.
Mixing - Cut or twist off desired amount of epoxy. Mix by kneading putty with fingers until a uniform color is achieved. For ease of mixing, warm putty to room temperature or above. Light powder on hands (corn starch, baby powder) is very helpful to minimize sticky epoxy contact with skin or gloves. Remove excess putty before hardening begins.
Packaging - The putty sticks are wrapped in polyethylene film and are protected on the ends with aluminum labels. The stick is doubly protected in an air-tight clear plastic cylinder. The remaining portion of unused putty can be saved by placing the aluminum label on the exposed end and put back into the container.

 

To purchase or for more
Protective
product information,
CLICK HERE

To Visit our WDIYC Web site, click here

Or visit our Corporate Web site


Protective Coating Co.
221 South Third Street
Allentown, PA 18102-4922
610-432-3543
Fax 800-220-2103
[ BACK TO IMEX CATALOG MENU ] [ IMEX HOME ]

Copyright © Worldwide Do-It-Yourself Council 2003